The stabilizer for the Stunt model of the aircraft is made by the composite manufacturing technology using the method of vacuum forming. It is perfectly symmetrical, and despite its large size is very light and durable. Not ready to fly. Requires installation of hinges and painting. After forming, 8 small platforms are left on the stabilizer for ideally precise installation on a flat surface. After installing the stabilizer, these 8 thin pads are easily removed with a sharp knife.
Scope of the stabilizer - 700 mm / 27.56 in
Stabilizer thickness - 22 mm (16 mm at the ends)
Stabilizer weight - 40 g / 1.41 oz (without elevators)
The stabilizer area is 7 sq.dm / 108.5 sq.in. (Without elevators)
Scope of a wheel of height - 335 mm / 13.19 in
The thickness of the rudder height - 16 mm (12 mm at the ends)
Rear edge thickness - 4 mm.
The weight of one elevator - 13.5 g / 0.48 oz
The area of one elevator is 2.25 sq.dm / 35 sq.in.
The total area of the stabilizer with the elevators is 11.5 sq.dm / 178.5 sq.in.
The total weight of the stabilizer with elevators - 67 g / 2.36 oz
Other sizes are shown in the picture in the photos.